Adhesive lubricant, HHS 2000
ADHLUB-HHS2000-500ML
HHS2000
Prices for customers after login
Register now and access more than 125,000 products
High pressure resistance
Extraordinarily tear-proof lubricating film with excellent noise and vibration dampening
Good creep properties
Adhesive
Lubricant is centrifuge-resistant on turning and rotating parts
Good material compatibility
O and X-ring compatible, as well with plastics. Neutral behaviour on painted substrates.
Resistant to splashed water, salt water, weak acids and alkalis
Silicone-free, resin-free and acid-free
Resistance to high pressure loads
The HHS 2000 lubricating film remains active and does not tear off despite the high pressure load and shearing motion of the base body. Reliably separates the counterpart-body from the base body and thus ensures optimum wear protection at higher pressure loads. This is only possible for dirt-free lubricating points, which is why we recommend a thorough and careful pre-clean with HHS Clean prior to application, art. 089310610.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Würth Catalogue(X)
Datasheets(X)
Certificates/Documents(X)
Suitable for universal lubrication and for high pressure loads, e.g. shifting, accelerator and clutch linkages, Bowden cables, pins, joints, hinges, reversing levers, lock strikers, drag link ends, sliding rails, chain wheels, toothed racks and open gearwheels
Shake the can before use, spray the parts and let it take effect briefly. After use, spray the can upside down until it is empty.
Chemical basis | Hydrocarbon |
Oil basis | Synthetic mineral oil |
Colour | Yellowish |
Smell/fragrance | Oil |
Density | 0.742 g/cm³ |
Density conditions | at 20°C |
Min. temperature conditions | -25 °C |
Max. temperature conditions | 180 °C |
Max. short-term temperature resistance | 200 °C |
Min. flashing point of active ingredient | 300 °C |
Kinematic oil basis viscosity | 1500 cSt |
Silicone-free | Yes |
Acid-free | Yes |
Resin-free | Yes |
AOX-free | Yes |
Resistance against | Salt water |
Contents | 500 ml |
Container | Can |
Shelf life from production | 24 Month |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
1/4 Inch Socket wrench set 17 pieces, hexagon
Brake cleaner
Vacuum brake bleeder set, 20 pcs
1/4-inch cardan joint
Chisel hammer MH -5-V-CLASSIC
O-ring, metric
Flap disc for steel and stainless steel Red Line
Cutting disc for steel
Hammer drill bit Max Quadro-L
Twist drill bit HSS DIN 338 type RN 130°
