1/2 inch torque wrench
Torque wrench push-through square drive
TRQWRNCH-PSHTHRG-1/2IN-(60-300NM)
Register now and access more than 125,000 products
- Accuracy of ± 3 % to the set value
- Simple and precise adjustment by turning the handle
- Switchover and/or push-through square drive
- Scaling in both newton metres (Nm) and pound-force feet (lbf·ft)
- Audible and tangible perception of torque triggering prevents over-tightening of bolts
- Anti-slip 2-component handle
- With calibration certificate
Torque wrenches are precision tools that must be checked at regular intervals with suitable measuring equipment and adjusted if necessary. We recommend annual calibration by our Master Service.
Datasheets(X)
After use, relax spring and set to lowest value.
 | |
Tip size | 1/2 inch |
Min./max. torque measuring range | 60-300 Nm |
Min./max. torque measuring range (inches) | 45-220 lbf.ft |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Scale value torque | 5 Nm |
ISO | DIN EN ISO 6789-1:2017 |
Length (L1) | 570 mm |
Length of lever (L2) | 550 mm |
Ratchet head height (B1) | 22 mm |
Ratchet head height with square (B2) | 45 mm |
Handle diameter (D1) | 37 mm |
Last viewed
Blow gun
Decorative trim adhesive tape
Flat blunt-ended file DIN 7261, shape A
Air tool fittings 1500 Series
Vacuum brake bleeder set, 20 pcs
Compression spring DIN 2095 spring steel wire, zinc-plated steel
1/2 inch torque wrench With push-through square drive and fine-toothed ratchet head
Turn Signal and Brake Light Bulbs S25 24V 21-5W BAY15d
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled