1/2 inch torque wrench push-through ratchet
Torque wrench push-through ratchet 1/2 inch
TRQWRNCH-PSHTHRG-1/2IN-(40-200NM)
Register now and access more than 125,000 products
- Trigger accuracy of +/- 3 % tolerance from the set scale value
- Non-slip two-component handle
- Easy-to-read, large double scale in N.m and lbf-ft.
- The torque can be easily and precisely adjusted by turning the handle
- The torque wrench does not have to be released after use, i.e. it does not have to be reset to the lowest scale value
- Settings can be securely locked and easily unlocked using the locking knob
- Clear acoustic and tangible torque triggering for precise screwing operations
- High-quality ratchet tool for use in confined spaces
- Includes declaration of conformity and serial number
- Sustainable, sturdy, moisture- and oil-resistant product packaging made of 100 % PCR (recycled plastic from household waste), 100 % recyclable
- Torque wrenches are precision tools that must be checked regularly using suitable measuring equipment and adjusted if necessary
- We recommend annual calibration through the Würth repair service (Master Service) after 12 months or 5,000 screwing operations. The interval begins with the first use of the torque wrench
Open packaging
1 Turn the lower part of the packaging sleeve to the left
2 Remove the packaging sleeve
Seal packaging
1 Plug on packaging sleeve
2 Turn the lower part of the packaging sleeve to the right
Datasheets(X)
Wide range of possible applications for controlled tightening of screws and nuts, for example, for repair and maintenance work on bicycles and vehicles/commercial vehicles or for industry and trade or anchor technology
 | |
Tip size | 1/2 inch |
Min./max. torque measuring range | 40-200 Nm |
Min./max. torque measuring range (inches) | 30-146 lbf.ft |
Number of turns from min. to max. torque value | 18 |
Design | With 72 teeth - 5 degree angle of rotation |
Scale value torque main scale | 2 Nm |
Torque measuring accuracy | +/- 3 % |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
ISO | 6789-1 |
Length (L1) | 488 mm |
Length of lever (L2) | 395 mm |
Handle length (L3) | 167 mm |
Ratchet head height (B1) | 24 mm |
Ratchet head height with square (B2) | 39 mm |
Handle diameter (D1) | 37 mm |
Ratchet head width (D2) | 45 mm |
Last viewed
Disposable breathing mask FFP2 Carbon
Cut protection glove TIGERFLEX® W-230 Level C
Engine oil TRIATHLON® Power 5W-40
Twist drill bit HSS DIN 338 type RN 130°
Double open ended spanners Metric
Engine oil TRIATHLON® Formula DX2 5W-30
Sealing ring, copper, shape A
Twist drill bit HSS DIN 338 type RN 130°
Flap disc for steel and stainless steel Red Stripe
Double ring spanner Metric