ASSY<SUP>®</SUP> 3.0 SK timber screw - SCR-SK-WO-AW30-(A2L)-6X80/50

ASSY<SUP>®</SUP> 3.0 SK timber screw - SCR-SK-WO-AW30-(A2L)-6X80/50 - 1

ASSY<SUP>®</SUP> 3.0 SK timber screw - SCR-SK-WO-AW30-(A2L)-6X80/50 - 2

ASSY<SUP>®</SUP> 3.0 SK timber screw - SCR-SK-WO-AW30-(A2L)-6X80/50 - 3

ASSY<SUP>®</SUP> 3.0 SK timber screw - SCR-SK-WO-AW30-(A2L)-6X80/50 - 4

ASSY<SUP>®</SUP> 3.0 SK timber screw - SCR-SK-WO-AW30-(A2L)-6X80/50 - 5

ASSY<SUP>®</SUP> 3.0 SK timber screw - SCR-SK-WO-AW30-(A2L)-6X80/50 - 6

ASSY<SUP>®</SUP> 3.0 SK timber screw - SCR-SK-WO-AW30-(A2L)-6X80/50 - 7

ASSY^® 3.0 SK timber screw

Name: ASSY ® 3.0 SK timber screw
Brand: Würth
SKU: 018480680

ASSY 3.0 SK steel zinc plated yellow PT AW
SCR-SK-WO-AW30-(A2L)-6X80/50
ASSY 3.0 SK

Art.-no. 018480680

EAN 4047376935068

All versions

Prices for customers after login

ASSY^® 3.0 SK timber screw

Art.-no. 018480680

Prices for customers after login

Quantity

x 100 pcs

Exclusively for trade customers

Login/Register
Call customer service: +632 584 4619

The ASSY 3.0 SK with a large washer head is especially suitable for staircase construction/woodworking and carpentry. For screw connections in staircase construction, modular construction, timber and passive house construction.

Hardened steel, zinc plated, yellow coated, partial thread, large washer head, AW drive, counter thread

Connects the wood instead of splitting it

Substrates:

Solid wood (coniferous wood, ash, beech, oak), laminated beams, cross laminated timber (CLT), timber veneer (coniferous wood or BauBuche), OSB and chipboard.

Large washer head

Very high penetration resistance or consolidation

AW drive – more power

Optimum transmission of forces

Very good snug fit

Fast location

Screw locates securely

Almost no unscrewing of the bit

No wobbling

No damage to surface coating of screw

Only 3 bit sizes for the diameters 5.0 to 12.0 mm

End mill – the "auxiliary motor" for lower force

Reduction of the screw-in and head countersinking torque by around 20%, especially with long screws

Protection of screw-in tools

From diameter = 5 mm, L = 70 mm

Asymmetric coarse thread – faster speed

Low screw-in torque

High over-turning force

Faster screwing than conventional chipboard screws – reduces processing time by 30%

Tip

Very precise positioning thanks to the 34° tip

Mating thread – less tendency of the wood to split, very few blow-outs

Minimal splitting forces, especially when screwing in at edges

Reduction of the screw-in torque

Blow-outs are avoided to a high degree thanks to the punching effect of the ring thread

Notice

Do not use the screw in applications exposed directly to the elements, in humid rooms or in atmospheres containing chlorine gas. For applications outdoors and in rooms which are briefly or constantly subjected to high humidity, please use the stainless steel ASSY 3.0 SK A2 screw, prefix number 0181.

ASSY 3.0 chipboard screws are optimised for use in wooden materials. When used in plastic anchors, a reduction of the load-bearing capacity is possible. Therefore, we recommend only using screws without optimised thread tips (drill bit, mating thread, ring thread, serrated edge, self-clearing groove, etc.) in plastic dowels, e.g. Würth ASSY D, prefix 0151 (countersunk head) and prefix 0153 (pan head). When using these screws, please follow ETA-11/0190 specifications.

Hardwood must be pre-drilled in accordance with ETA-11/0190.

Available work documents:

Timber dimensioning software, load tables and detailed processing instructions can be found on the service page www.wuerth.de/assy.

ETA-11/0190

When using these screws, please follow ETA-11/0190 specifications.

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

Application area

For screwing in secondary wooden components with greater pressure - universal use

Constructive end grain screw connection

Instructions

Screw-in angle 0° to 90°. For coniferous wood or wood-based materials made from softwood, make the fitting without a bradawl. To reduce the edge distances make a predrilled hole according to the core diameter. When screwing into hardwood, drill according to ETA-11/0190.


Nominal diameter (d)	6 mm
Length (l)	80 mm
Thread length (lg)	50 mm
Head type	Round washer head
Head diameter (d_h)	14 mm
Head height (k)	3 mm
Internal drive	AW30
Thread type	Wood screw thread
Thread design	Partial thread
End milling cutter	Yes
Thread form	Coarse thread
Core diameter	3.9 mm
Shape of tip	Tip with counter thread
Angle of the tip	34 Degree
Material	Hardened steel
Surface	Zinc plated yellow
Colour	Yellow
Max. screw-in angle	90 Degree
Min. screw-in angle	0 Degree
Suitable for use in the following materials	Board ply wood (BSP), Wood, Derived timber product, Hardwood, LVL, Softwood
Area of application	On rafter insulation, Element construction, Timber construction, Structural woodwork
Additional accessory	Bit lock
Approval	ETA-11/0190

Additive article:

Product

Description

Quantity

Price
/PU

AW<SUP>®</SUP> C 6.3 bit (1/4 inch) with patented AW tip and colour coding

AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding

BIT-AW20-LUMINOUSORANGE-1/4IN-L25MM

Art.-no. 06145120

AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding

BIT-AW30-LUMINOUSYELL-R1026-1/4IN-L25MM

Art.-no. 06145130

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).