Welcome to Würth Philippines For trade customers only

Wedge anchor W-ED/S-BND

Wedge anchor W-ED/S-BND steel zinc ptd. w. collar

Art.-no. 090404010

Prices for customers after login

Wedge anchor W-ED/S-BND

Art.-no. 090404010

Prices for customers after login



x50 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Female thread anchor with collar and metric thread for economical anchoring in concrete, zinc plated steel
  • Small drill hole depth

  • High load-bearing capacities

  • Visual setting check and hand protection when installing with the marking/spreading tool

  • Mechanical setting tool makes installation quicker and easier

  • Immediate load-bearing capacity — no waiting

  • Attached part can easily be removed at any time

  • W-ED/S has collar enabling anchor to be installed flush with the surface and preventing it slipping further into the drill hole (safer installation)

  • The attached part can be anchored with a fastening screw or a threaded rod

  • No installation torque required

Drive-in anchor W-ED/A4 see [13.2]

ETA-02/0044 for individual attachment, option 7, non-cracked concrete

ETA-05/0120 for multiple attachment of non-load-bearing systems, non-cracked and cracked concrete

Fire resistance: F30, F60, F90 and F120; exposure to fire according to DIN 4102-2:1977-09 (uniform temperature curve)

Fire resistance: R30, R60, R90 and R120; TR020 (included in ETA-05/0120)

Product information

Würth Catalogue(X)


CAD data (available after login)

Application area

Individual attachment: Standard concrete C20/25 to C50/60 (non-cracked concrete)

Multiple attachment: Anchorage of non-load-bearing systems (cracked and non-cracked concrete)

Suitable for attaching threaded rods, metal structures, metal profiles, grilles, cable conduits, pipes, mounting rails etc.

Can be used in concrete < C20/25 and compression-proof natural stone (without approval)

W-ED/S, W-ED/S-BND and W-ED M5 may only be used in dry indoor room conditions

Anchor diameter

10 mm

Anchor length (L H)

40 mm

Min./max. required screw-in depth

11-15 mm




Zinc plated

Nominal drill-bit diameter (d 0)

12 mm

Drill hole depth (h 0)

40 mm

Effective anchoring depth (h ef)

40 mm

Torque during anchoring (T inst)

15 Nm

Through-hole in the component to be connected (d f)

12 mm

Art.-no. Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Catalogue page as PDF  | 


Datasheets ()

CAD data  | 




Technical information