Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
SCR-CS-DIN7982-C-H1-A2-2,9X6,5
Art.-no. 012329 65
EAN 4048539507153
Register now and access more than 125,000 products
- Tapping screws are thread-forming screws. These screws form their own counter thread when screwed into a prefabricated tapping hole.
- Reference values for selecting the correct tapping-hole diameter are included in DIN 7975.
- Type C with threaded tip, type F without tip and type R with rounded threaded tip
Stainless steel tapping screws are weaker than case-hardening steel tapping screws. This means that these screws cannot form a counter thread in sheet steel. For this reason, they are used in soft materials such as aluminium only.
Datasheets(X)
 | |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Form | C |
Nominal diameter (d1) | 2.9 mm |
Length (l1) | 6.5 mm |
Head diameter (dk) | 5.5 mm |
Head height (k1) | 1.7 mm |
Internal drive | H1 |
Drive type | H |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Declaration of performance (EU-CPR) | No |
Shape of tip | C |
Last viewed
Quick Fresh Active air-conditioning disinfection
Engine oil Triathlon® Ultra Base 10W-40
Threaded fuse MEGA
Rust remover Rost-Off
Screwdriver for hexagon drive with flexible shaft
Cleaning device, vehicle, accessories
Super RTV silicone adhesive and sealing compound
Plastic crevice nozzle for vacuuming in confined spaces with industrial wet and dry vacuum cleaners
Screwdriver set automotive/metal with hexagon shank and hex bolster in sheet steel rack
Car Windscreen Wiper Conventional Standard