Digital vernier callipers, fractional
Digital vernier calipers with fraction display
CAL-DGT-(0-150MM)
Register now and access more than 125,000 products
- Measuring unit: Metric or inch
- LCD digital display 9 mm
- Operating temperature 0°C to 40°C
- Battery: 1.5V silver oxide cell (LR44)
- Battery voltage indicator light on the display
- Automatic switch-off / 5 min.
- Stainless steel, hardened and ground
- Measuring surfaces ground and lapped
- With locking screw
- Thread table on the reverse
- Depth gauge on calliper
- Delivery in plastic box
- Battery included
Delivered in plastic box.
Complies with DIN 862
Datasheets(X)
The callipers have two measuring arms on each side for measuring internal and external dimensions. The callipers also have a depth gauge that can be used e.g. for measuring bore holes. The callipers have a table on the reverse for looking up the diameter of core holes in thread cutting.
Absolute length measuring accuracy | 0.03 mm |
Max. length measuring range | 150 mm |
Length of jaw | 40 mm |
Last viewed
Twist drill bit HSS DIN 338 type RN 130°
Hand tap, taper tap HSS DIN 352
Radiator anti-freeze
1/2 inch socket wrench assortment 21 pieces
Silicone spray
Desoldering Pump
Double open-end wrench
Twist drill bit assortment HSS DIN 338 type RN 118° 19 pcs
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Limited edition tool set 46 pieces