Drop-in anchor W-ED
Wedge anchor W-ED for core drill steel zinc plated
ANC-(W-ED/S)-(A2K)-WO.APPROVAL-M12
Register now and access more than 125,000 products
- Quick, cost-effective installation thanks to small drill hole depth
- Maximum safety thanks to high load-bearing capacity in non-cracked concrete
- Secure mounting using the associated manual expander tool
- Installation type: Cotter pin installation
- Immediate load-bearing capacity — no waiting
Attached part can easily be removed at any time
The attached part can be anchored with a fastening screw or a threaded rod
W-ED M12:
Anchor's special solid outer wall reliably prevents breaking out of the anchoring base – even in the event of sudden loading from the core drill. To be installed with the specified torque.
W-ED DW15:
- Highly versatile: Variable rod lengths and clamping strengths can be used
- Thread resistant to soiling
- Saves time: No need to apply torque
DYWIDAG® female thread (DYWIDAG® is a registered trademark of Walter Bau AG)
Datasheets(X)
CAD data (available after login)
- The anchor may only be used for anchorages with predominantly static loads or quasi-static loads; W-ED M12 (without approval)
- Can be used in non-cracked concrete >= C20/25 and compression-resistant natural stone. Higher values are possible for higher concrete strengths
- Suitable for anchoring core drills (solid wall plug body)
W-ED DW (unapproved)
- Can be used in non-cracked concrete >= 15/20 up to max. C50/60 and compression-resistant natural stone/higher values are possible for higher concrete strengths
- Securing formwork in site-mixed concrete construction
- Securing corner elements when concreting upright edges
Anchor diameter | 12 mm |
Anchor length (L H) | 50 mm |
Thread type x anchor diameter | M12 |
Material | Steel |
Surface | Zinc plated |
Nominal drill-bit diameter (d 0) | 16 mm |
Drill hole depth (h 0) | 54 mm |
Torque during anchoring (T inst) | 35 Nm |
Last viewed
Thread extractor set 25 pieces
Double open ended spanners Metric
LED headlight bulb Retrofit
Hand tap, third tap HSS DIN 352
3/4-inch impact socket wrench insert hexagon, metric, short
Pneumatic nailer DSK 1555
4-CUTTER PLUS HAMMER DRILL BITS
Cleaning device, vehicle, accessories
Windscreen Bonding TROPICS+ CLASSIC
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)