Drop-in anchor W-ED
Wedge anchor W-ED for core drill steel zinc plated
ANC-(W-ED/S)-(A2K)-WO.APPROVAL-M12
Art.-no. 0904010126
EAN 4038898923190
Register now and access more than 125,000 products
- Quick, cost-effective installation thanks to small drill hole depth
- Maximum safety thanks to high load-bearing capacity in non-cracked concrete
- Secure mounting using the associated manual expander tool
- Installation type: Cotter pin installation
- Immediate load-bearing capacity — no waiting
Attached part can easily be removed at any time
The attached part can be anchored with a fastening screw or a threaded rod
W-ED M12:
Anchor's special solid outer wall reliably prevents breaking out of the anchoring base – even in the event of sudden loading from the core drill. To be installed with the specified torque.
W-ED DW15:
- Highly versatile: Variable rod lengths and clamping strengths can be used
- Thread resistant to soiling
- Saves time: No need to apply torque
DYWIDAG® female thread (DYWIDAG® is a registered trademark of Walter Bau AG)
Drill the hole
Clean the drill hole
Knock in anchor until flush
Anchor with expander tool
Fit component, apply torque
Datasheets(X)
CAD data (available after login)
- The anchor may only be used for anchorages with predominantly static loads or quasi-static loads; W-ED M12 (without approval)
- Can be used in non-cracked concrete >= C20/25 and compression-resistant natural stone. Higher values are possible for higher concrete strengths
- Suitable for anchoring core drills (solid wall plug body)
W-ED DW (unapproved)
- Can be used in non-cracked concrete >= 15/20 up to max. C50/60 and compression-resistant natural stone/higher values are possible for higher concrete strengths
- Securing formwork in site-mixed concrete construction
- Securing corner elements when concreting upright edges
Anchor diameter | 12 mm |
Anchor length (L H) | 50 mm |
Thread type x anchor diameter | M12 |
Material | Steel |
Surface | Zinc plated |
Nominal drill-bit diameter (d 0) | 16 mm |
Drill hole depth (h 0) | 54 mm |
Torque during anchoring (T inst) | 35 Nm |
Last viewed
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Digital clip-on ampere meter AM 600 AC/DC
Thread die HSS DIN EN 22568 for standard metric ISO threads
Paint sealant PINK
Metric double box-end wrench with POWERDRIV®
Cleaning device, vehicle, spare parts
Hexagon nut, low profile, with clamping piece (non-metal insert) ISO 10511, steel, strength class 5, zinc-nickel-plated, black (ZNBHL)
Twist Drill bits HSS ASME B94.11M TYPE RN
3/4" T-handle
Twist Drill bits HSS ASME B94.11M TYPE RN