Multigrade compressor oil Pro
Multi-grade compressor oil Pro
COMPROIL-MULTIGRADE-PRO-1000ML
Register now and access more than 125,000 products
Compatible with following refrigerants: R-23, R-125, R-134a, R-1234yf, R-227, R-413a, R-407c, R-410a, R-404a, R-507
Can be mixed with PAG oil and ester oil
Excellent lubricating effect
- Longer compressor service life
- High level of refrigerant compression in the compressor
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For universal maintenance and lubrication of vehicle air-conditioning compressors in the refrigerant circuit. Suitable for refrigerants R-134a, R-1234yf and other HFC and HFO refrigerants. Suitable for all cars, trucks, buses and agricultural machines equipped with R-134a or R-1234yf air-conditioning systems.
Top up low compressor oil according to the amount recommended by the vehicle manufacturer and add to the air-conditioning circuit via the air-conditioning service unit.
Contents | 1000 ml |
Chemical basis | Phosphate |
Density | 0.979 g/cm³ |
Density conditions | at 20°C |
Kinematic oil basis viscosity | 85 cSt |
Conditions for viscosity of oil basis | at 40°C, in accordance with ASTM D-445 |
VOC concentration (CH) | 0 % |
Min. flashing point | 282 °C |
Last viewed
Pneumatic cleaning gun TOP Gun
Decorative trim adhesive tape
Screwdriver TX
Tension spring with double eyes DIN 2097, spring steel wire, zinc-plated steel
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Filling appliance for lubricant
Pneumatic axial driver DAS 1/4 inch With adjustable friction clutch for precise torque control
Flat blade fuse ATO ISO 8820-3
Hammer drill bit Plus Quadro-S
Wrench