Welcome to Würth Philippines For trade customers only

Petrol performance improver For all petrol engines with and without a catalytic converter

Performance enhancer petrol

Art.-no. 5861101150
EAN 4056807384610
Prices for customers after login
Petrol performance improver For all petrol engines with and without a catalytic converter

Art.-no. 5861101150

Prices for customers after login

Exclusively for trade customers

Register now and access more than 125,000 products

Reduces fuel consumption thanks to exact fuel preparation

Suitable for E10

  • Protects against water occurring in the fuel tank due to the hygroscopic property of E10 fuel

  • Prevents corrosion

  • Cleans deposits in the fuel system

Reduces the formation of harmful exhaust gases through optimum combustion

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information


Certificates/ Documents



Application area

Removes lacquer-type deposits and resin buildup in pipes, petrol pump, carburettor, valve tips and valves. Also removes oxidation residues.


Empty the contents of the can into the fuel tank. The optimum amount is 150 ml for 35-40 litres. 300 ml is sufficient for 70-75 litres. The product is self-mixing. It does not do any harm if too much product is mixed.


150 ml





Chemical basis


Shelf life from production

24 Month


0.799 g/cm³

Density conditions

at 20°C

Min. flashing point

-10 °C

Cust. Mat. No.

Hazardous Material

Product information


Datasheets ()

CAD data  | 

Certificates/ Documents



Technical information