Plastic anchor ZEBRA Shark W-ZX^®

Name: Plastic anchor ZEBRA Shark W-ZX ®
Brand: Würth
SKU: 090621056

Plastic anchor Shark W-ZX
DWL-(W-ZX)-PLA-10X56
ZEBRA-SHARK

Art.-no. 090621056

EAN 4038898528302

All versions

Prices for customers after login

Plastic anchor ZEBRA Shark W-ZX^®

Art.-no. 090621056

Prices for customers after login

Quantity

x 800 pcs

Exclusively for trade customers

Login/Register
Call customer service: +632 584 4619

The most versatile Würth plastic anchor. Knotting in cavities, expansion in solid materials

Guaranteed knotting in all cavities and expansion in all solid materials

Patented anchor head causes the anchor shaft to knot when the screw is inserted

Low insertion torque and high fixed torque

The hammer-in stop prevents premature expansion during push-through installation

Fold-down anchor collar — suitable for cotter-pin and push-through installation

The anti-rotation device or twist lock prevents turning in the drill hole

High-quality polyamide (nylon)

Halogen-free and silicone-free

Resistant to rotting, weathering and ageing

For mounting, we recommend the ASSY-D plug screw

Drill the hole

Clean the drill hole

Install anchor

Screw in screw until flush

Drill the hole

Install anchor

Screw in screw until flush

Drill the hole

Install anchor

Screw in screw until flush

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Universal plastic anchor

Can be used in concrete, solid brick, solid sand-lime brick, vertically perforated brick, hollow sand-lime brick, aerated concrete, plasterboard, gypsum fibreboard

Suitable for mounting wardrobes, curtain rails, wall shelves, lightweight wall cupboards, picture frames, mirrors, lamps, cable ducts, cable clamps, electrical switches, wash basins, towel rails, signs, motion detectors

For attaching components in conjunction with a wood or particle board screw (without drill tip, counter thread, ring thread) (e.g. ASSY-D)

Can be used outdoors or in wet rooms in conjunction with a stainless steel screw

Anchor diameter	10 mm
Anchor length (l)	56 mm
Nominal drill-bit diameter (d 0)	10 mm
Min. required screw diameter	6 mm
Max. required screw diameter	8 mm
Embedding depth (h s)	55 mm
Edge clearance (a r)	50 mm
Drill hole depth (t)	75 mm
Max. attachment height (d a) - condition	Dependent on screw length
Required screw length (l s)	Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter
Colour	Red brown

Performance data
Anchor diameter [mm]			5	6	8	10	12	14
Recommended loads¹⁾	Concrete ≥ B25; C20/25	F_rec [kN]	0,4	0,8	1,0	1,6	2,2	2,5
	Solid bricks ≥ Mz12; KS12		0,3	0,5	0,7	1,4	1,7	1,7
	Vertically perforated brick ≥ Hlz12²⁾		0,1	0,2	0,2	0,3	0,3	0,4
	Hollow sand-lime bricks ≥ KSL12²⁾		0,2	0,4	0,6	1,0	1,0	1,0
	Autoclaved aerated concrete PB2; PP2²⁾		0,05	0,1	0,1	0,15	0,2	0,35
	Gypsum plasterboard d = 12.5 mm ²⁾		0,1	0,1	0,1	0,1	0,1	0,1
	Gypsum plasterboard d = 25 mm ²⁾		0,15	0,15	0,15	0,15	0,15	0,15
	Gypsum fibreboard (Fermacell)²⁾		0,2	0,2	0,2	0,25	0,25	0,25
¹⁾ These values apply when using wood screws with the largest screw diameter. ²⁾ The drill hole is to be made with a rotary drill (without impacting or hammering). ³⁾ Edge distance in concrete.

Characteristic values
Edge distance³⁾	a_r ≥ [mm]	30	35	40	50	65	80
Drill hole depth	t ≥ [mm]	40	50	60	75	80	90
Embedment depth	h_s ≥ [mm]	27	34	45	55	65	75
Nominal drill diameter	d_drl. [mm]	5	6	8	10	12	14
Screw diameter	d_scr [mm]	3-4	4-5	4.5-6	6-8	8-10	10-12
Screw diameter in panel building materials	d_scr2 [mm]	3	4	4,5	6	8	10
Screw length	l_s [mm]	Attachment thickness (+ plaster/insulation thickness) + anchor length + screw dia.