Profile rubber adhesive

Name: Profile rubber adhesive
Brand: Würth
SKU: 0890100015

Profile rubber adhesive
RBRADH-PROFILE-BRUSHCAN-180ML

Art.-no. 0890100015

EAN 4060053866417

All versions

Prices for customers after login

Profile rubber adhesive

Art.-no. 0890100015

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +632 584 4619

Contact adhesive for universal use

Good adhesion properties on a wide variety of substrates

High initial adhesion

Quick drying

Easy to use

Ready to use

Handy can with brush

Easy to spread

Resistant to the effects of water (including seawater), petrol, dilute acids and alkali solutions

Resistant to ageing

Cures to transparent

Silicone-free

Notice

Protect from exposure to direct sunlight and heat.

The profile rubber adhesive should be stored in a cool, dry place at temperatures between +15 °C and +25 °C

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Typical applications are door and window rubbers, seals, insulating mats and linings in cars, caravans and boats, as well as bonding soles and PU foam sheets. Not suitable for laying carpets!

Instructions

Components must be dry and Free of dust or grease. Can be applied with a brush or machine.

Apply the profile rubber adhesive evenly to both surfaces to be bonded. Apply two coats to absorbent materials. After a drying time of at least 10 minutes, press the surfaces together.

For more information, please refer to the technical data sheet.

Chemical basis	Synthetic rubber
Colour	Transparent, yellowish
Density	0.92 g/cm³
Density conditions	at 20°C
Smell/fragrance	Characteristic
Min./max. processing temperature	5 to 35 °C
Min. flashing point	-25 °C
Building material class	B3 - Of high flammability
Ultraviolet resistance	No
Solvent-free	No
Silicone-free	Yes
Contents	200 ml
Weight of content	160.2 g
Shelf life from production	24 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 2

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 3

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.