Spot weld cutter for HSCO pneumatic tools
HSCo spot weld cutter for Vario Drill
CTR-SPTWELD-HSCO-VARIODRILL-D6MM
Register now and access more than 125,000 products
Extra stable tip geometry for difficult milling conditions
Optimised tip geometry for a longer service life compared to conventional spot weld cutters
Very good centring of the cutter on the spot weld and precise milling
115° centring point
Burr-free cutting
180° tip angle on the trimming corners
Datasheets(X)
- For drilling thin-walled workpieces made of sheet steel <= 850 N/mm2, brass sheeting, aluminium sheeting, zinc sheeting, copper sheeting and plastic panels
- The 44 mm long spot weld cutter with 8 mm diameter uniform shank and special clamping surface was developed for use in all conventional pneumatic machines (e.g. Wieländer+Schill Vario Drill, Spitznagel, Spotle Vision etc.). A separate spot weld cutter (WÜRTH art. no. 0710 141 080) is required only for the TH-902 Spotle units and their predecessor model T-575.
- Ensure a constant rotation speed of up to max. 850 rpm is maintained
- Use coolants and lubricants if possible
Last viewed
1/2 inch socket wrench insert metric, hexagon, short
1/4-inch torque wrench
Sanding disc NET PERFECT
1/2 inch socket wrench insert metric, hexagon, short
Professional dispensing gun 4 in 1
Double ring spanner Metric
3-component slotted screwdriver
Rubber eraser Waterbased
3/8-inch T-handle
Cordless LED hand-held lamp WLH 1.2