Standard car windscreen wiper With pre-assembled multi-adapter
Car windscreen wiper Standard
WSCRNWPR-CAR-525MM-21IN-1PCE
FIRSTEC
Register now and access more than 125,000 products
Resealable individual packaging
- Lengths can be individually customised
- Low storage costs and minimal space requirement
Robust metal bar system
- Individual joints connected via stainless steel rivets
- High resistance to weathering
- Stainless steel pin joints in plastic casing
- Quiet wiper blade behaviour on the windscreen
Refillable (replacement rubber wiper blade)
- Optimised storage costs
- Protecting resources (environment)
Scope of delivery:
1x windscreen wiper with profile edge protection including preinstalled multi-adapter and 9 x 3 U-clip adapters for high market coverage
Safety:
Make sure that the windscreen is free of oil, wax, tar and other soiling, so that the service life is not negatively affected.
Tip:
Always lay a protective material on the windscreen when mounting.
Installation:
For aerodynamic reasons (spoiler function), it must be ensured during mounting that the punched logo on the wiper blade faces the engine hood.
Datasheets(X)
For older cars with hook mountings (9 x 4 and 9 x 3 mm) and new vehicles with hook wiper arms (normally small cars, Asian vehicle manufacturers).
Length | 525 mm |
Length in inches | 21 in |
Last viewed
Double open-end wrench
Hand tap, second tap HSS DIN 352
Electronics hot air blower HLG 2000
Screwdriver set automotive/metal With hexagon shank and hex bolster in sheet steel rack
Magazine screwdriver Limited Edition - Reinhold Würth Signature
Chipping hammer MH 16-XE
HSS annular cutter
Protective suit TYVEK® 500 Xpert
Crimp cable lug, push connector PVC-insulated
Petrol injection system cleaner