Tap wrench DIN 1814 Performance, adjustable
TAPWRNCH-DIN1814-PERFM-SZ1,5-(M1-M12)
Art.-no. 0657800150
EAN 4061975320766
Register now and access more than 125,000 products
Pinpoint accuracy
- Precision-eroded, hardened clamping jaws with built-in guide groove.
- As a result of the eroding process, only minimal radii are created at the internal and external corners.
- The movable jaws are secured to the handle by a split pin.
- Thanks to this innovative type of fastening, a loosening of the thread screw connections is prevented.
Convenient operation
- Handles with a fine cross knurling ensure safe work even under a high degree of contamination.
- When used in confined spaces, a handle can be unscrewed easily.
Safe work even using high forces
- Offers very high load-bearing capacity compared to standard models.
- Black coated handles made of steel and powder-coated tap wrench body make for a high level of resistance.
Datasheets(X)
Adjustable tap wrench for mounting hand tools with a square shank in accordance with DIN 10, such as hand taps, reamers or screw extractors.
When clamping hand taps, please note the following:
- Turn the handle to release the movable jaw.
- Place the square shank of the hand tap in the resulting gap.
- Turn the handle again to secure the hand tap between the clamping jaws.
- When clamped in this way, the tool is suitable for cutting threads by hand.
- First drill a tapping hole into the workpiece.
- Apply suitable cutting fluid and lubricant to the hand tap.
- Place the hand tap perpendicular to the workpiece.
- Use the 2 handles to apply a high level of force when cutting threads.
- When cutting threads manually, it is important to ensure that the drill bit is turned back at regular intervals, in order to break the swarf created.
Size | 1.5 |
Length | 180 mm |
Material | Die-cast zinc |
DIN | 1814 |
Min./max. thread-cutting area, metric | 1-12 mm |
Suitable for min./max. square socket size | 2-8 mm |
Min./max. thread-cutting area Whitworth pipe thread BSP (G-thread), imperial | 1/8-1/8 in |
Min./Max. thread-cutting area Whitworth (W-thread), imperial | 1/16-1/2 in |
Min./max. reamer cutting range | 2.5-9.5 mm |
Last viewed
Screwdriver PH striking cap with hexagon shank
Air conditioning evaporator detergent Step 1_Degrease
Torque wrench 1/2 inch, limited edition
Longlife & Speed HSSCo8 bimetal cylinder saw
Twist drill bit HSS DIN 338 type RN 130°
SPEED cutting disc for aluminium and non-ferrous metals
Twist drill bits HSS DIN 338 type RN TIN head
Flap disc for steel and stainless steel Red Stripe
4-CUTTER MAX HAMMER DRILL BITS
Twist drill bit HSS DIN 338 TYPE RN