Thread die HSS DIN EN 22568 for standard metric ISO threads
Threaded die HSS DIN 13-1
THRDIE-HSS-DIN223-M8
Register now and access more than 125,000 products
Two-sided cut
- Can be used on both sides
- Threads can be cut in one process
- Easy cutting and excellent chip removal in cutting direction
High edge retention
Datasheets(X)
The die is placed in the die holder at the height of the middle screw. The screws are tightened with a screwdriver. The die is placed vertically on the workpiece. Can be used on both sides. When cutting, sufficient cutting oil must be added. After two revolutions, the cut can be broken by briefly turning back.
Type description | For metric ISO thread DIN 13 |
Cutting material | HSS |
Surface | Plain |
Thread type | Metric thread |
Form | B |
Tolerance class | 6g |
Thread type x nominal diameter | M8 |
Pitch | 1.25 mm |
Outer diameter | 25 mm |
Height | 9 mm |
Material to be processed | Steel, Cast iron |
Last viewed
Drill BM 13-CLASSIC
Speed cutting disc For stainless steel
Twist drill bit HSS DIN 338 type RN 130°
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Twist drill bit HSCO DIN 338 type RN
HSS bimetal cylinder saw
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Speed cutting disc For stainless steel
Backpack with laptop compartment