Torque wrench With push-through square drive and fine-toothed ratchet head
Torque wrench, switchover square drive, fine head
TRQWRNCH-PSHTHRG-3/8IN-(20-100NM)
Register now and access more than 125,000 products
- Accuracy of ± 3 % to the set value
- Simple and precise setting by turning the handle
- Scaling in both newton metres (Nm) and pound-force feet (lbf·ft)
- Audible and tangible perception of torque triggering prevents over-tightening of bolts
- Anti-slip 2-component handle
- With calibration certificate
Torque wrenches are precision tools that must be checked at regular intervals with suitable measuring equipment and adjusted if necessary. We recommend annual calibration by our Master Service.
After use, relax spring and set to lowest value.
 | |
Tip size | 3/8 inch |
Min./max. torque measuring range | 20-100 Nm |
Min./max. torque measuring range (inches) | 15-80 lbf.ft |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Scale value torque | 1 Nm |
ISO | DIN EN ISO 6789-1:2017 |
Length (L1) | 350 mm |
Length of lever (L2) | 330 mm |
Ratchet head height (B1) | 22 mm |
Ratchet head height with square (B2) | 33 mm |
Handle diameter (D1) | 37 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Plug-in fuse OTO-B/BT OEM quality
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Twist drill bits HSS DIN 338 type RN TIN head
Combination wrench, angled
Twist drill bit HSS DIN 338 type RN 130°
Limited edition tool set 46 pieces
BMF workshop cleaner
Tungsten carbide bur with MX teeth
Rust remover Rost-Off