Wedge anchor W-FC/S non-ETA
Fixanchor W-FC/S steel zn plated Non-ETA approval
ANC-(W-FC/S)-(A2K)-10-23-M10X90
Register now and access more than 125,000 products
For use in medium and heavy duty applications
Single fixing
Anchoring in uncracked concrete (concrete compression zone)
W-FC/S is suitable for dry interior spaces
In-place installation
2 Embedment depths
Available in M8, M10, M12
Can be loaded immediately after installation
Reliable installation
Due to application of prescribed torque moment on anchor
Datasheets(X)
- Suitable for anchoring of metal structures, metal profiles, consoles, footplates, supports, cable trays, pipelines, railings, wood structures, beams, purlins, etc.
- The anchor may be used in concrete with strength C20/25 or below and in some types of masonry units (for example pressure-resistant natural stone)
- The anchor is to be used only for anchorages subject to static (e.g. gravity load) or quasi-static loading (e.g. slowly varying live loads)
Material | Steel |
Surface | Zinc plated |
Anchor diameter | 10 mm |
Anchor length (l) | 90 mm |
Effective anchoring depth (h ef) | 55 mm |
Nominal drill-bit diameter (d 0) | 10 mm |
Drill hole depth (h 1) | 75 mm |
Max. attachment height (t fix) | 23 mm |
Torque during anchoring (T inst) | 25 Nm |
Last viewed
Combination wrench, angled
Flap disc for steel and stainless steel Red Stripe
Engine oil Triathlon® Ultra Base 10W-40
Compression spring DIN 2095 spring steel wire, zinc-plated steel
Locking pliers set
Polarised sunglasses
Hand tap, third tap HSS DIN 352
Twist drill bit assortment HSS DIN 338 Type RN 118° 25 pcs
O-ring, imperial NBR 70
Twist drill assortment HSS DIN 338, type RN 130°, 19 pieces