Windscreen cutting line
Windscreen cutting line
CUTLNE-WSCRN-RD-L25M
Register now and access more than 125,000 products
High-tech fibres for very high tensile force
Extremely tear-resistant cutting thread for use in tight corners and in particularly narrow gaps
Minimal risk of paint and interior damage
Thanks to its round cross section, cutting injuries are virtually unheard of.
Reusable and flexible
- Can be used 2–4 times
- If the thread tears, it can be knotted to continue working
The tensile strength is specified in N in this case; for cutting wires, it is indicated in N/mm². One square cutting wire with 0.6 x 0.6 mm cross section and 2000 N/mm² corresponds to tensile strength of approx. 720 N.
Datasheets(X)
Form | Roll |
Min. tensile force | 1800 N |
Length | 25 m |
Colour | Red |
Material | PE - Polyethylene |
Cord thickness | 0.85 mm |
Last viewed
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Circlip pliers, shape A for shaft circlips
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated black (A2S), shape C, with tip
Hand tap, second tap HSS DIN 352
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Engine oil TRIATHLON® Universal HCDP 20W-50
Socket wrench, bi-hex, 3/4 inch Assortment of 15 pieces
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Petrol fuel injection valve cleaner LBW 400