Welcome to Würth Philippines For trade customers only

Diamond cutting disc for construction sites

Diamond cutting disc construction HC JC TS

Art.-no. 0668771351
EAN 4048539444335

Prices for customers after login
Diamond cutting disc for construction sites

Art.-no. 0668771351

Prices for customers after login
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Construction site disc for universal use in concrete, reinforced concrete, clinker, brick etc.
  • Fan segments for better dissipation of heat and removal of dust in comparison with conventional segments
  • Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds

  • If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts

  • Cut larger workpiece cross-sections into several sections (swing cut)

  • Work without applying pressure – the weight of the machine is sufficient. Increased pressure causes increased wear.

  • Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs – risk of injury!

  • Despite the level of safety offered by the tool, always wear safety glasses and clothing while working

  • Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions

  • The direction arrow on the disc must match the machine's direction of rotation

  • Must not be used for lateral grinding

  • Use the appropriate protective guard

  • Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)

  • If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Product information


Certificates/ Documents



Application area
  • For hand-held cutters, floor saws and stationary saws/table saws

  • For dry and wet cutting

Diameter (Ø)

350 mm

Drill hole

25.4 mm

Segment height

10 mm

Segment thickness

3.2 mm

Number of segments

24 PCS

Segment connection


Max. rotation speed

5400 rpm

Max. circumferential speed

100 m/s

Cust. Mat. No.

Hazardous Material

Product information


Datasheets ()

CAD data  | 

Certificates/ Documents



Technical information