Wedge anchor W-FC/S non-ETA
Fixanchor W-FC/S steel zn plated Non-ETA approval
ANC-(W-FC/S)-(A2K)-18-M16X140
Register now and access more than 125,000 products
For use in medium and heavy duty applications
Single fixing
Anchoring in uncracked concrete (concrete compression zone)
W-FC/S is suitable for dry interior spaces
In-place installation
2 Embedment depths
Available in M8, M10, M12
Can be loaded immediately after installation
Reliable installation
Due to application of prescribed torque moment on anchor
Datasheets(X)
- Suitable for anchoring of metal structures, metal profiles, consoles, footplates, supports, cable trays, pipelines, railings, wood structures, beams, purlins, etc.
- The anchor may be used in concrete with strength C20/25 or below and in some types of masonry units (for example pressure-resistant natural stone)
- The anchor is to be used only for anchorages subject to static (e.g. gravity load) or quasi-static loading (e.g. slowly varying live loads)
Material | Steel |
Surface | Zinc plated |
Anchor diameter | 16 mm |
Anchor length (l) | 140 mm |
Effective anchoring depth (h ef) | 84 mm |
Nominal drill-bit diameter (d 0) | 16 mm |
Drill hole depth (h 1) | 95 mm |
Max. attachment height (t fix) | 18 mm |
Torque during anchoring (T inst) | 80 Nm |
Last viewed
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Hand tap, third tap HSS DIN 352
Plug-in nipple Series 2000
1/2 inch angled extension
Metric double box-end wrench with POWERDRIV®
Formwork release oil sprayer With corrosion-resistant, polyester-coated steel container
Twist drill assortment HSS DIN 338, type RN 130°, 19 pieces
3/4-inch impact socket wrench insert hexagon, metric, short
Air conditioning evaporator purify Step3_purify spray
Hose clamp with asymmetrical lock